Vaporesso Xros 4

Using the Xros 4 by Vaporesso is as easy a 1, 2, 3!

1. Take the black cap off of the pod and fill it with your choice of e-liquid, using the red refill port at the side.
2. Secure the cap and reinsert the Xros 4 pod into the battery.
3. Switch on the Xros 4 by pressing the fire button 5 times in quick succession. Activate it by either holding the button or inhaling on the mouthpiece and enjoy tasty clouds of vapour!

The Xros 4 Mini by Vaporesso is an inhale-activated vape without buttons. Due to this there’s no way to switch it off, instead it reverts to Standby Mode when not in use.

How to refill a Vaporesso Xros 4?

To refill your Vaporesso Xros 4, follow these simple steps:

• Remove the Xros 4 pod from the device.
• Take the cap off of the pod.
• Insert the nozzle of your vape juice into the refill port (indicated by a red seal at the side)
• Gently squeeze the bottle until the pod is filled with e-liquid.

The Vaporesso Xros 4 has 3 power modes: Eco, Normal & Power. Also referred to as Low, Medium and High.
To cycle through them click the button 3 times in fast succession to access and then click the button again to transition to the next setting. Once you’ve selected your preferred mode, don’t touch the button for several seconds whilst it selects your setting.

If your Xros 4 Vaporesso is leaking it could be for a few reasons.

Examples:

• Your pod needs replacing
• You’re using an incompatible vape juice
• The cap isn’t secured.

To resolve these:

• Make sure the cap is firmly in place with no gaps around the edge.
• Use 50/50 e-liquids with MTL pods of 0.6 Ohms or more.
• Use high VG vape juices with Xros 4 pods of 0.5 Ohms or less.
• If these don’t resolve the issue, try replacing your pod with a new one.

The Xros 4 coil deteriorates over time and needs to be replaced approximately every 2 weeks.

The Xros 4 Mini features a RGB battery indicator that changes colour to display the batteries current power level.

• Red: A red light shows the battery is between 0% - 30% charged.
• Blue: A blue light shows the battery is between 30% - 70% charged.
• Green: A green light shows the battery is between 70% - 100% charged.

Once the battery indicator stops blinking green it’s fully charged.

The Xros 4 kit and Xros 4 Nano are compatible with ALL Vaporesso Xros 4 pods. However, the Xros 4 Mini is NOT compatible with the 0.4Ω or 0.5Ω Xros 4 pods, and should be used with those with a 0.6Ω resistance or higher.

If your Vaporesso Xros 4 Mini is not working, it’s likely due to one of three reasons:

• The pod needs replacing due to a damaged coil or connection
• There’s e-liquid on your connection pins that needs cleaning off
• Your vape’s battery is low and it needs charging.

If your vape is charged and you’ve tried replacing the pod but the device still isn’t working, it could be that the 4 Mini Xros is faulty.