The latest Minikin V2 180W Touch Screen by asMODus features the new, more battery- efficient, GX-180-HT chipset, a capacitive touch screen and a USB port for firmware upgrades, while the ergonomic design of the body makes it comfortable to handle.
The Minikin V2 180W has a new maximum cap of 180W in wattage mode and 120W in temperature mode with temperature control range of 100°C to 300°C. The resistance range features 0.1 to 2.5 Ohms.
The responsive LED display shows the particular mode of user, individual battery charge, resistance of the atomizers, the duration of the fire, volts being used to fire and a puff counter.
The Minikin V2 main menu can be accessed by swiping down the display screen. Once unlocked, it will prove options to access three menus: Setup resistance ("SET RES”); firing mode ("MODE"); and setup ("SET Up').
- "SET RES” will allow the user to manually change the device resistance.
Please Note: The changing of resistance only applies when using a temperature control mode.
- "MODE" has four menus "PWR", "COIL", "TCR" and "TFR"
The “PWR” menu provides two different options: “W” which is the standard wattage control mode and the new “CURVE” mode. Touching the “CURVE” will allow the user to set five different wattages over time presets. For example by adjusting the “CURVE,” the device can be setup to fire at 70 watts for 1 second, 90 watts for 1.2 seconds, and 110 watts for 1.5 seconds.
The "COIL” mode allows the selection of the type of wire being fired. The Minikin V2 supports Ni200, SS316, SS317, and Ti. "TCR" and "TFR" modes.
- "SET UP" will allow the adjustment to the screen brightness on scale of 1 to 10. The next menu will allow the user to setup “PUFF LIMIT". When limit is reached the device will not fire. From the last menu there is an option to clear the puff counter.
The latest Minikin V2 180W Touch Screen offers a powerful and dependable vape experience. This will go great with our e-cig kits which includes all the essentials for beginners and whilst you're at it check out our great selection of e-liquids.
- Capacitive Touch screen
- GX-180-HT chipset
- Upgradeable firmware
- Output power range: 5.0 - 180.0 watts
- Output power range (TC Mode): 5.0 - 120.0 watts
- Temperature control range: 212° - 572°F / 100°C - 300°C
- Atomizer resistance range: 0.1 - 2.5 ohm
- Max output voltage: 7.5 volts
- Peek output current: 45 amps
- Charging parameters: DC 5V/1A
- 2x 18650 sized batteries (not included)
Write a Review
We verify all reviews are genuine. Please make sure your read our review policy before leaving your review.
- battery life
Good mod, but some lack of quality control I guess.
First of all, sorry for my english, is not my native language. I bought this mod before, and it worked fine for five months, until one day it fell to the ground. The consecuence was some battery did short and it damaged a pole in the craddle, and also a magnet. I asked Asmodus for spare parts, but the cost was too high due to the shipment costs to Spain, so I decided to buy a new one, keeping the other as a replacement if the new one gets damaged. So... With the new one, I've encountered two problems I haven't with the original one. First problem was the case, too loose. I sent an email to Greyhaze asking what to do, and they told me that, with time it would fit well, or: "If you squeeze it tighter then it will hold more securely to the mod and wont fall off." Well, I was not to damage the case trying to squeeze it, and the time did not solved it, so, I have still this problem. The other issue are some peeled parts. It have only 4 months of use, less than with the other one, and part of this time combining it with another mod. This might be caused by e-liquid leaks. Right now, in addition to the peeled parts, there are wrinkles in the material on the superior part, who'll probably end up peeling themselves. To be honest, I wasn't expecting this kind of problems on a pretty expensive mod like this one, and had'nt suffered these with the first one. As example, I've been using an Smok Mag (the third replacement actually, but for other issues) for months, and have no peeled parts... On the other hand, and combining both experiences, with the first one and his "replacement": The electronic part of the mod works fine, battery case was confy to use, and the mod feels perfect on the hand, with the right size and weight, and a confortable material. Puff button it's also confortable and works perfect 100% of the time. About the tactile screen, well, sometimes takes some time to unblock it, specially if you're trying while walking. All in all, for the first mod I did not a review, but I would have given it 5 stars before it broke. But due to the totally different experience with the second one, I would have give it 2 stars. In conclusion, I gonna give it 4 stars because I'm guessing I got somewhat defective unit.
ONE OF THE BEST MODS
So good and beautiful
Love this little mod!
I’m a real Asmodus fan so it’s no surprise I love the Minikin 2. I have three of them now! This Rotten Metal finish is really unique too. And Grey Haze is awesome too.
A great little mod, the touch screen is simple to use, sometimes it's a little hard to swipe to unlock, but you get the hang of it. It's a beautiful looking mod, and works well, for a duel mod it is good, it doesn't **** up too much battery life.